Device does not turn off
@hrns wrote: device does not turn off when battery and usb power are plugged in. poweroff command restarts device. What is the cause of this problem? Posts: 1 Participants: 1 Read full topic
View ArticleWhere is TVOUT pin (TP8) on BPI-M2+ board?
@dony wrote: I need TVOUT on BPI-M2+ board On the schematic is shown is on testpoint TP8 Can anybody help me to point out where is this TP8 location? I want to get RCA connector for video out Posts: 2...
View ArticleDifference in Ubuntu and Debian
@troumad wrote: I don’t know if you nead this… But I write it… In /etc/network/interfaces In ubuntu I have put wan before eth1. In debian, wan can not be activate automatically. I do “ifup wan”...
View ArticleScratch on Banana Pi for Steam education
@sinovoip wrote: Scratch on Banana Pi for Steam education Banana Pi BPI-M64 runs scratch 3.0 offline (ubuntu 16.04) Banana Pi BPI-M64 and microbit with scratch 2 offline Raspberry Pi 3B+ runs scratch...
View ArticleClik here to view.
Banana Pi introduction at EDTECH TAIWAN 2018 on Dec 2
@sinovoip wrote: Banana Pi introduction at EDTECH TAIWAN 2018 on Dec 2 Justin introduction Banana Pi for Steam education DTECH TAIWAN 2018 1.jpg750x453 90.2 KB Nora interact with maker teachers on...
View ArticleHow to set POE in BPI-M2 zero armbian image？
@WilliamLu wrote: Hi all, I downloaded image:2017-12-04-Armbian_5.36_Bananapim2zero_Debian_stretch_next_4.14.3_preview_build_by_bpi.img, Want to use POE Ethernet on BPI-P2 zero, how do I set it?...
View ArticleBPI-R2 Wifi Adhoc Network
@jayms_patel wrote: I am trying to configure BPI-R2 with IBSS mode. While looking at wireless interface capability, It supports IBSS mode. Can someone help or have tried Adhoc network on BPI-R2....
View ArticleClik here to view.
Banana Pi BPI 4.0 OEM&ODM project: magic mirror, base BPI-M3, allwinner A83T...
@sinovoip wrote: Banana Pi BPI 4.0 OEM&ODM project: magic mirror, base BPI-M3, allwinner A83T chip design magic mirror 2.JPG750x466 88.8 KB main function: Weight scale + bluetooth speaker + air...
View ArticleHow to enable HDMI on my own kernel
@michal5520pl wrote: Hello, how can I enable HDMI if I have my own Linux kernel 4.9.119? Thank you, Michael. Posts: 1 Participants: 1 Read full topic
View ArticleWhich image to use for BPI M2 BRY
@le_audio wrote: Dear all, apologies if this question already came up but I couldn’t find anything regarding that topic. I bought a BPI M2 Berry with a 16GB Kingston Micro SD card (class 10). I...
View ArticleBanana pi M2 Berry boot from sata ssd
@Aart wrote: Hi I’ve got a m2 berry with sata drive connected. The os is Raspbian jessie 8.0 V1.1. I want to move the whole os to the sata ssd and want to boot from the sata disk. I’ve tried different...
View ArticleBpi and gateway with wire
@troumad wrote: Now I haveall do with my bpi-r2, but not the gateway. It’s run with your debian. I have server, wifi (with hostapd…) but if I do a gateway between wan and lan[0-3], the network in...
View Article2.8 inch CTP Screen (SPI based) on Android
@essam_salah wrote: Hi, We would like to get the M2M connected to a tiny capacitive touch screen, the one we found is from Adafruit ( https://www.adafruit.com/product/1983) , wondering from where to...
View ArticleHow to check CPU temperature on BPI-M2 Zero
@roy wrote: Hello Guy. my CPU bpi-m2 zero temperature getting too hot after boot armbian 5.41 ubuntu xenial desktop. it is normal ? and How can i check my CPU temperature? Thanks a lot. Posts: 1...
View ArticleInstalled git 2.19.2.1 on manjaro linux - connecting with or without SSH-Keyset
@say_hello wrote: dear experts, i just installed git 2.19.2.1 on manjaro linux Pakete (1) git-2.19.2-1 Gesamtgröße der installierten Pakete: 34,81 MiB Größendifferenz der Aktualisierung: 0,00 MiB ::...
View ArticleBanana Pi BPI:bit with arduino platformio to control lamps
@sinovoip wrote: Banana Pi BPI:bit with arduino platformio to control lamps Posts: 1 Participants: 1 Read full topic
View ArticleBattery draining issue
@Dwyane_Dekfin wrote: I have Asus S510UN-BQ265T laptop which has wonderful battery backup which gives the best battery standby time but it gets overheated fast to using it for a long time. I have...
View ArticleHow to Poweroff BPI-W2 "Normally"
@tjjh89017 wrote: It seems there is no way to poweroff the hardware “normally” Even I use poweroff cmd, the hardware LEDs are still on. If I force to plug out the power supply, filesystem will be...
View ArticleBanana pi BPI-M3 retropi retroarch lakka recalbox
@LeMelvin wrote: Hat jemand schon einen dieser Emulatoren für Spielekonsolen auf einem Banana Pi M3 zum laufen gebracht? Ausgangssituation: Banana Pi M3 32GB SD Karte Netzteil 2,5A Video über HDMI...
View ArticleR2 Mini Pci-E Question
@Christoo wrote: Hello all, a very simple question that I hope you can help me with. I have thoroughly confused myself. I have a Banana Pi R2 which has a Mini PCI-e port. (52 pins I think) I want to...
View Article
