Source code request: ROM code
@SandPox wrote: Hi, it looks like the ROM code of the SPI wasn’t open source? Can we get the source code for it? I mean the file BPI-W2-bsp/rt-pack/rtk/bpi-w2/bin/spirom-bpi-w2.bin Posts: 3...
View ArticleClik here to view.
BPI-W2 Demo Image Release : Raspbian 9.8 stretch & AArch64 Linux Mate &...
@sinovoip wrote: BPI-M4/BPI-W2 Demo Image Release : Raspbian 9.8 stretch & AArch64 Linux Mate & AArch64 Linux Lite 2019-06-19 BPI-M4/BPI-W2 Demo Image Release : Raspbian 9.8 stretch &...
View ArticleDid anybody made the M3 work with hzeller/rpi-rgb-led-matrix?
@GeorgeFlorian wrote: Hello ! I’ve been trying for the past few days to make the Banana Pi M3 work with hzeller/rpi-rgb-led-matrix LED Library. But it doesn’t. I’ve tried with Jessie: Linux...
View ArticleClik here to view.
Problem with 10.1" waveshare LCD touchscreen
@nyqeest wrote: Hi, I have a problem with my Banana Pi M2U. I bought it purposefully to cooperate with the 10.1 touch display from Waveshare https://www.waveshare.com/10.1inch-HDMI-LCD-B-with-case.htm...
View ArticleSATA support as a loadable kernel module
@shazam wrote: I’m trying to compile the SATA support for the BPI-W2 as a loadable kernel module. I’ve modified the kconfig file to build the SATA mdoules (libata) and Realteck AHCI module (ahci_rtk)...
View ArticleClik here to view.
[Webduino custom building] machine learning KNN classification algorithm
@sinovoip wrote: very thank Chungi Fu shre this project. [custom building] machine learning knn classification algorithm Set Blockly:...
View ArticleMicropython software serial for esp32
@sinovoip wrote: Added a soft serial interface module, the code in serial.py. You can stop worrying about the number of serial ports, but note that only 9600 are stable, 57600 will shake, 115200 to be...
View ArticleArduino for BPI:bit , using LEDC (PWM)
@sinovoip wrote: Arduino core for the ESP32 not the general Arduino PWM function analogWrite(pin, value) ，Instead, ESP32 has a LEDC designed to control leds. The LEDC on ESP32 has a total of 16...
View Article720P DTS file? where is it?
@shaddow501 wrote: I am trying to find the file sun50i-a64-bpi-m64-720p.dts , where is it? why I only can find the DTB? If I would like to change the resolution of the screen I need to modify this...
View ArticleHow can I test what GPIOs work?
@GeorgeFlorian wrote: Hello ! I am trying to test if the M3’s pins works or not and I’ve stumbled upon this library: https://github.com/joan2937/pigpio Linux bananapim3 4.19.38-sunxi...
View ArticleClik here to view.
BPI-M4 Android 8.1 Demo Image Release 2019-06-25
@Jackzeng wrote: BPI-M4 Android 8.1 Image Release 2019-06-25 image.jpg681x602 183 KB image.jpg743x638 182 KB This release is for BPI-M4 which is based on rtd1395，Image is Android 8.1.0 with kernel...
View ArticleBPI-R2 emmc flash not working properly
@moschip wrote: Hello, I am following below steps to flash OpenWRT images to EMMC, Here, BPI-R2 board is up with SD card and EMMC.img is copied. dd if=mtk-bpi-r2-EMMC.img of=/dev/mmcblk0 echo 0 >...
View ArticleClik here to view.
Banana Pi BPI-P2 Maker board just sale for 13 USD for promotional
@sinovoip wrote: Banana Pi BPI-P2 maker an ultra compact single board computer measures only 65mm*52.5mm. It uses quad-core Cortex A7 allwinner H2+ processor(Option : H3 and H5), with 512MB RAM ,100M...
View ArticleBPI-W2 with ubuntu 18.4 kernel 4.14+
@Steven_Chen wrote: Hello R&D, I have an INTEL WIFI 802.11AC NGW9260 M.2 Card which must be driven by LINUX KERNEL 4.14+ Could you provide Ubuntu 18.4 image with linux kernel 4.14? Posts: 1...
View ArticleClik here to view.
Arduino for BPI:bit 7: Seting Wifi
@sinovoip wrote: ESP32 typically USES its WIFI capabilities, which are basic operations like setting up, connecting, and searching networks. Networking (AP) Here’s the basic code for a wifi...
View ArticleBuilding Custom image for BPI-R18-AVS-720P
@Saira_Bibi wrote: I am trying to build a custom image for BPI using https://github.com/BPI-SINOVOIP/BPI-M64-bsp-4.4.First of all I ran this script with option 1. It compiled everything. But after...
View ArticleDisable boot menu
@thesnake wrote: Hello, i would like to disable the uboot menu and make the R2 boot right away with no delay. To achieve this i have added bootmenu_delay=0 to uEnv.txt. Unfortunately, this does not...
View ArticleBSP linux not booting with prebuilt image
@Jagan_Teki wrote: Hi, I have used 2017-07-13-ubuntu-16.04-mate-desktop-beta-bpi-m3-lcd7-ov8865-sd-emmc.img for BPI-M3 and it is booting perfect. but when I replace uImage with BSP linux from...
View ArticleArduino for BPI:bit 5 ：how to use bpi:bit Serial port
@sinovoip wrote: The concept of > Serial Communications is simple, and Serial ports send and receive bytes by bit.In serial communication, the most important parameters are baud rate, data bit,...
View ArticleClik here to view.
BPI-M4 M.2 PCIe test: uses TP-link TG-3468 Gigabit Ethernet PCIE card (M.2 to...
@sinovoip wrote: Banana Pi BPI-M4 uses TP-link TG-3468 Gigabit Ethernet PCIE card (M.2 to PCIE) 微信图片_20190628092233.jpg750x500 140 KB 微信图片_20190628092312.jpg750x498 139 KB...
View Article
