Banana-pi m4 a quick overview
@sinovoip wrote: Banana-pi m4 a quick overview http://wiki.banana-pi.org/Getting_Started_with_M4 Posts: 1 Participants: 1 Read full topic
View ArticleBanana-m64 android device is in suspend state
@Puneet_P wrote: I am not able to wake up android device banan m64 by pressing PMU power key button from deep sleep state, normal sleep and wakeup working fine with power button, [ 725.742612]...
View ArticleClik here to view.
Enable Integrated Audio BPI-M2Ultra (R40)
@juanesf wrote: Hi, I have managed to activate the internal audio in R40 SoC with H3 driver, to achieve this I have used images of Armbian Stretch and Bullseye and I have merged a U-boot mainline fork...
View ArticleOpenWRT @ BPI-R2 EMMC - What am I doing wrong?
@sine_line wrote: Hello! I’ve got a BPI-R2 into which I’ve been trying to install OpenWRT. I’ve seen there are two forks besides the main branch: Master OpenWRT 18.06 (now 19.06) Lexa2 build...
View ArticleWiFi issue in Banana pi M2 zero
@Prem_Kumar wrote: Dear BPi Team, Myself Prem, I am an embedded developer,I work on SBC’s I used work on Rpi’s most of the time , recently for a project I chose rpi zero, but rpi zero was inefficient...
View Article[BPI-R2] OTG-port
@frank-w wrote: Hi, i’ve got info that USB-OTG driver was included in upstream an added it to my 5.4-main-tree. now i hang on dts-node…i took node from example of Patch and modified to have no...
View ArticleRead and write GPIO with FPGA interface
@wisdomz wrote: I am new guy for M64 board. I had used the M64 read and write the parallels data into FPGA GPIOs, my idea is to use the python or wiringPi, I search the forum with wringPi. 1- it is...
View Articlehttps://dev.banana-pi.org.cn/Image/BPI-R2/Openwrt/1806/mtk-bpi-r2-SD.img
@JoeK wrote: Is there any description how the file above was created. All install-images on OpenWRT website have approx. 4.5 MB and do not boot the BPI-R2 when written to SD. That above image boots a...
View ArticleClik here to view.
Run Rosserial Over the Internet with ESP32
@sinovoip wrote: Run Rosserial Over the Internet with ESP32 Hackster.io Run Rosserial Over the Internet with ESP32 In this project, I'll show you how to use rosserial on ESP32 to connect that popular...
View ArticlePi hole on BananaPi M1
@Pheggas wrote: Hello. I’m trying to get pi hole working but there are errors through process. For example, on Raspbian (found here: http://www.lemaker.org/product-bananapi-resource.html ) There’s...
View ArticleIp tv ylcn 1453
@ylcn1453 wrote: Bir kurabilirsem ozaman Posts: 1 Participants: 1 Read full topic
View ArticleBPI-R2 integrated WiFi trouble
@xpk wrote: I try to start BPI-R2 work as router with integrated card + frank-w kernel 4.14, and after iperf3 tests, my speed at wifi link is down to 0. After more manipulations, I detect what this...
View ArticleClik here to view.
Enlarge partition sdcard ? and sata install?
@faustf wrote: Hi guys , i have a banana più m2 ultra , i have downloaded , a iso of Ubuntu Mint i had installed in sd card 128gb but the partions is very small , i tryed to shrink with a software...
View ArticleClik here to view.
Mali 450 support by ARM driver
@eros wrote: Hello try get Mali 450 chip to working. Used Frank 4.19-main kernel and downloaded newest (r10) mali driver from: ARM Developer Mali Drivers | Open Source Mali Utgard GPU Kernel Drivers –...
View ArticleAudio with pin define
@Julien_Romagnoli wrote: i need some information about BPI-W2 there is some difference between http://www.sinovoip.com.cn/ecp_view.asp?id=577 and...
View ArticleClik here to view.
MT7623 overcloking, voltages, powerconsumption, governors
@eros wrote: Hello I’m trying to overclock bpi R2 board to get more speed. I have installed heatsink to CPU. This say up to 1.6Ghz is posible if 28nm: ARM Developer So my goal is to get it 1.7Ghz...
View ArticleClik here to view.
Lima userspace drivers: Xorg/mesa/tools/etc for BPI-R2
@DeadMeat wrote: As we got certrain succes with lima driver (Mali-450 support by lima) it’s good time to start new thread for OS-related support questions. As i know - minimum requirements are: libdrm...
View ArticleMotionEye packages
@Daniel wrote: Hi guys, I’m running Raspbian 9.4 Kernel 3.10 on BPI-M64. During installation MotionEye software I’got errors as below. Is there anyone to help my with this?Sadly MotioEye forum is...
View ArticleUnstable wireless
@Jason_Gauthier wrote: Greetings, My first experience with Banana Pi. After installing armbian, I am unable to maintain a stable wireless connection. Here’s a dmesg output from boot. Around 1500-2000s...
View ArticleBananapi-W2 Wifi & 4G cards
@raj1992 wrote: Hello, I am looking for the bananapi-W2 wifi cards and 4g cards to buy. As I am unable to find the wifi and 4G cards. Also, I want some information regarding the realtek chip does it...
View Article
