Compile latest kernel 5.6.14 for BPI-R2
@bibibo wrote: Hello, i would like to ask you, is it possible to compile latest kernel for BPI-R2 ? I tried it but i was not successful. I used the build.sh script from BPI-R2 kernel but the latest...
View ArticleBPI-M2 Zero Standard Serial Communication
@mbcdev wrote: Hello everyone! Happy to be here - spent some time reading a bit on the forum earlier today, glad to see there are some people out there that use this platform. Hopefully, this hasn’t...
View ArticleBPI-M2 Zero bridged setup problems: IP address reassigned
@vgromov wrote: I started configuring small router setup using BPI, so far so good, but there are some things I cannot understand. So far, I got created bridge containing single eth0 interfaces file...
View ArticleBurn to eMMc without external help
@Micael_illos wrote: HI I’ve looked through the whole internet looking on how to burn to eMMc without any external help (monitor or ssh). I want to put an sd card in for it to burn to the emmc...
View ArticleProblem trying to use emmc
@sailingfree wrote: Hi, Ive got a bpi r2 and I’m trying to follow the instructions to configure it to boot from the emmc, for example from here:...
View ArticleDo-system-upgrade from Ubuntu16.04 to 18.04?
@RobertPHeller wrote: I installe the 16.04 / Kernel 4.4 / aarch64 image on my new M64. It says when I log in that it can be updated to 18.04. Will this actually work? Including a kernel update? Posts:...
View ArticleKernel boot comman line
@RobertPHeller wrote: Where / how ddo a modify the kernel boot command? I am guessing the M64 uses uBoot, but how is uBoot configured? Posts: 1 Participants: 1 Read full topic
View ArticleCorrect DC power plug size for a M64
@RobertPHeller wrote: What is correct DC power plug size for the M64? I know I can power it with the micro-B (OTG) connector, just like my Raspberry Pis, but I would like to use the OTG for something...
View ArticleBPI-M2 Zero no WiFi
@chippey5 wrote: I have tried to get Wifi up and running on my bpi-m2 zero with 5 different images resulting in the same. I have tried running it with nmtui, nmcli, wpa_supplicant, iwlist wlan0 scan...
View ArticleWwan0 not added when plugging in usb Netgear Beam
@treii28 wrote: I have been playing with a 330u Netgear Beam LTE 3g/4g cellular device trying to get it to work on my raspberry pi’s without luck. I figured I would try it on my banana M1 to see if it...
View ArticlePersistent uBoot environment variables?
@RobertPHeller wrote: Somehow I created a “persistient” variable. How did I do that? I want to reset it to its original value… Posts: 2 Participants: 1 Read full topic
View ArticleuSDCard max size
@AaronNGray wrote: I have got a BananaPi M3 running on a 128GB micro SD Card. Can I use a 256 or even ideally 512 GB ? Posts: 2 Participants: 2 Read full topic
View ArticleClik here to view.
Banana Pi got Intellectual property management system certification
@sinovoip wrote: Banana Pi got Intellectual property management system certification banana pi .jpg1070×752 90.1 KB Posts: 1 Participants: 1 Read full topic
View ArticleBanana Pi BPI-P2 Zero current consumption
@erickang wrote: Hi, Does anyone knows the current consumption of BPI-P2 Zero? Thanks. Posts: 1 Participants: 1 Read full topic
View ArticleBanana Pi BPI-W2 HDMI Input not working
@BilboBaggins1 wrote: (topic withdrawn by author, will be automatically deleted in 24 hours unless flagged) Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
4OZ Heavy Copper 4L PCB with ENIG
@kingcredie wrote: PRODUCT DESCRIPTION Base Material Fr4 TG170 Layer Counts 4L Board Thickness 2.0mm Copper Thickness 4OZ Min.Hole Size 12mil(0.3mm) Min.Line Width/Spacing 8mil(0.2mm)/10mil(0.25mm)...
View ArticleUbuntu 16.04 LTS Lite eMMC image for BPI P2 Zero
@RoboFarm wrote: Hi everyone I`m planning to use BPI P2Z on my projects and there is a problem with all those images posted by the SinoVoip … The debian/raspbian/ubuntu images are using the same...
View ArticleLCD module(DSI+RGB) with touch and S070SWV20HG-DC16 lcd panel + mainline kernel
@s3b0 wrote: I have bought panel from subject(from here: https://allegro.pl/oferta/ekran-dotykowy-tft-7-800x480px-do-banana-pi-8223136875) but i can’t make it work with mainline(5.7) kernel. I have...
View ArticleScreen resolution - no way to change it
@monoamiga wrote: Hi everyone! I bought a BPi M4 a week ago and I’m continously struggling with the display. There is NO WAY to change the screen resolution, it’s stuck at 1920x1080. I’ve downloaded...
View ArticleClik here to view.
BPI-M2 Zero, unable to change mode of GPIO Pins
@Recognition wrote: Hi, my first post here! I’m just learning about the BPI-M2 Zero and want to control LEDs with the GPIO Pins and python. I have successfully done this on a RPi Zero W with no...
View Article