Physics homework helper
@nickvoz wrote: Hi there! I just wanna say thanks for this forum, i didn’t even think that something like that existed. So once again thank you! I will be glad if I help someone too. If you have...
View ArticleLite version raspbian
@thinker wrote: Dear I have running raspbian on the bananpi M4. The issue i have is the SD card of 7G is almost full . I could use e.g. 32 G for test , but the pupose is to running my system on emmc...
View ArticleSSH unresponsive BPI-M2+ Zero
@ahorvat wrote: Having tried several of the images on this forum including Rasbian, Debian, Ubuntu server, I am unable to establish a solid SSH connection over wifi on any image. I receive a password...
View ArticleDeplorable state of W2 software
@otavioborges wrote: The most up-to-date kernel image is 4.9.119. Quite outdated already and most of the peripherals don’t work. HDMI Tx, HDMI Rx, secondary GMAC, PCIe 2 are not working. The support...
View ArticleWhy is my AOL IMAP server not working properly?
@smith8395john wrote: I am working on an AOL email account for my personal usages. AOL mail service is one of the best emailing applications, which is majorly used by millions of users. I am...
View ArticleAdding a GPIO port expander (mcp23017) to a M64
@RobertPHeller wrote: With a Raspberry Pi (raspbian), when one adds a port expander (like an i2c mcp23017), one can use dtoverlay to load a device tree which will load and configure the device driver...
View ArticlePersistent uBoot environment variables?
@RobertPHeller wrote: Somehow I created a “persistient” variable. How did I do that? I want to reset it to its original value… Posts: 2 Participants: 1 Read full topic
View ArticleBPI R2 defconfig for buildroot
@elfawal wrote: Hello, I am new to BPI R2. I want to build my own image using buildroot but I cannot find the defconfig file for BPI R2. does BPI R2 support buildroot? Thanks, Alaeddine Posts: 3...
View ArticleClik here to view.
[BPI-M1] uboot @68941e3b2c and boot.scr
@rdbisme wrote: Hello, I just wanted to share with you a recent version of u-boot I recently compiled for my BPI-M1 and the associated boot.scr with which I’m able to boot the latest version of Arch....
View Article[BPI R2] Hostapd multiple SSID on MT7612
@Popote wrote: Hi, I bought a MT7612 for my BPI R2 board. Acces point configuration works perfectly with one SSID. If I understand wifi board specifications, it seems to support multiple AP (for a...
View ArticleEnabling the m64 eMMC under armbian
@RobertPHeller wrote: The m64 eMMC is not showing up under armbian (5.4.43-sunxi64). Here is the relevant bits of dmesg’s output: gollumm64% dmesg | grep mmc | less -X [ 4.149531] sunxi-mmc...
View ArticleBPi R64. OpenWrt. Dont Work Gpio Please help me
@Redevice wrote: Hello. I made my own build of Openwrt. But the system does not have the / sys / class / gpio / directory. What could have gone wrong? If necessary, I will provide any information....
View ArticleBPI-W2 SPI ROM CMD11 Fail
@shazam wrote: Every once in a while at the beginning of the boot process of my BPI-W2 from an SD Card the boot process will hang at the following error: can switch to 1.8V = 0x00000001 Command...
View ArticleUnusual I2C Behavior
@manbehindthemadness wrote: So I am using a BPI-M2 Zero, slick little board. I have I2C up and running and I can detect devices. The problem here is it only works with specific I2C entities. For...
View Article[BPI-R64] uboot env-location
@frank-w wrote: Hi, what is the best offset for env-storage in uboot (saveenv) for bpi-r64? i have this offset defined in my build.sh, but i don’t know where i got it ENV_START=1280 #ENV_OFFSET =...
View Article[R64)Mainline OpenWRT image
@graphine wrote: I’ve managed to create an image from master branch which is able to persist settings after reboot. You can write it with dd to /dev/mmcblk0 after extracting. Let me know if it works...
View ArticleBanana Pi Repair
@RW2003 wrote: I killed the ethernet chip of my R2 board. The board was on a electroconductive surface and now ethernet is not working anymore. Do someone knows a way to repair it? Or somewho who can...
View ArticleM2 Zero K3s installation
@gavan1 wrote: installation works well on an early release by @sinovoip 2020-04-28-ubuntu-16.04-server-bpi-m2z-sd-emmc.img the quick install script on...
View ArticleI can't control the PIGPIO ports
@Guillelo wrote: Hello, I have a problem with controlling the PIGPIO ports of the BPI-M2 Zero. Normally I use Node-Red but it doesn’t load RPI-GPIO nodes also does not work i can control PIGPIO ports...
View ArticleClik here to view.
Fstab setup for SATA drive on M1
@DiBosco wrote: I have had a Banana Pi M1 for a few years and yesterday had a catastrophic failure on the SATA drive. A few years ago I set up the system to boot off the SATA drive, but you still had...
View Article