BPI-M5 The Next Generation Single Board Computer From Banana Pi
@sinovoip wrote: BPI-M5 The Next Generation Single Board Computer From Banana Pi #BananaPi #RaspberryPi #orangepi #odroid #Linux #Android #SBC #opensource Posts: 1 Participants: 1 Read full topic
View ArticleBanana Pi M2 Pro - Review and GIVEAWAY!
@sinovoip wrote: Banana Pi M2 Pro - Review and GIVEAWAY! Posts: 1 Participants: 1 Read full topic
View ArticleBpi-m2 zero Uart at 100k baudrate
@Mas wrote: Hello everyone, I have to port my project to bpi m2 zero from raspberry pi zero. My requirement is to use serial port uart at 100k baud for sbus protocol. Sbus protocol ( used to connect...
View ArticleBuild U-Boot from denx u-boot source
@jhortwo wrote: Hi, I want to know if there is a way to build U-Boot from denx source. I was looking but there’s no support for BPI-M5 but for Odroid C4. I want to run kernel 5.X mainline. Posts: 1...
View ArticleClik here to view.
Failed to cross compile Asterisk voice channel for OpenWRT
@mper02 wrote: Hi everyone, I recently got into OpenWRT and compiled a working image of the snapshot version for the R64. I was planing on creating a VoIP GSM gateway with the Quectel EC25-E modem. I...
View ArticleHelp! BPI-M2 Zero unable to boot/HDMI receives no signal
@Hanstjua wrote: I tried to use different Linux images provided here: http://wiki.banana-pi.org/Banana_Pi_BPI-M2_ZERO#Documents No success so far in getting anything displayed on screen; the only...
View ArticleU-Boot for mainline Kernel 5.10.x
@jhortwo wrote: How I can build a U-Boot for BPI-M5 that can boot Mainline Kernel 5.10.x? ¿The U-Boot 2021.04-armbian (Jul 19 2021 - 19:21:12 +0800) bananapi-m5/m2pro could work? Posts: 1...
View ArticleSchematics For Banana Pi M2 Berry
@Ali_Afzal wrote: Hi Everyone,I have some questions about Banana Pi M2 Berry. Is it possible to convert the pdf schematics to eagle Schematics file or anyway to import the schematics to Eagle? Is...
View ArticleU-Boot and kernel 5.14
@jhortwo wrote: Hi, anyone knows if the U-Boot build from BPI-M5-bsp can boot Kernel 5.14 build? Kernel version is independent from U-Boot? Posts: 44 Participants: 4 Read full topic
View ArticleClik here to view.
[solved][BPI-R64] Mesh (802.11s) on internal WiFi card (MT7622AV)
@jonny wrote: Hi, I’m trying to use Mesh (802.11s) on the internal WiFi Card (MT7622AV according to the openwrt wiki) between two BPI R64 -V1.1, but I didn’t get it to work. It seems that the beacons...
View ArticleAll banana pi document and image download link
@sinovoip wrote: Because of the Google security update some of the old links will not work if the images you want to use cannot be downloaded from the new link bpi-Files...
View ArticleDevice ID for BPI-M2 Pro not showing in the Google Service Framework (GSF) of...
@Stephanus_Booyzen wrote: Device ID is not give me the Google Service Framework (GSF) on the my BPI-M2 Pro. Can someone please help me with this ! Posts: 3 Participants: 2 Read full topic
View ArticleClik here to view.
Banana Pi at Shenzhen ELEXCON International Electronics Show & Embedded...
@sinovoip wrote: Shenzhen ELEXCON International Electronics Show & Embedded System Exhibition 2021. Banana Pi team welcome you to our booth ELEXCON Shenzhen International Electronics Show &...
View ArticleClik here to view.
BPi-M1 - HW Support = Built-in microphone usage under (Arch) Linux
@HP77 wrote: Hi there, I am new to the Banana Pi Forum, But, got enough experience to deal with U-Boot compilation to get Arch Linux ARM booting and running from BPi Pro, BPi-M1 and BPi-M3-A83T....
View Article[BPI-R64] WAN port not working
@jorticus wrote: For some reason the WAN port on my BPI-R64 doesn’t work, though the LAN ports do.When I plug in a LAN cable the LEDs do not light up and I do not see any messages from the kernel....
View Article[R2 pro] - Ethernet-switch
@frank-w wrote: Hi, based on the Wiki (https://wiki.banana-pi.org/Banana_Pi_BPI-R2_Pro) the switch-chip is a RTL8367RB-VB-CG. this have no dsa-driver. but openwrt offers a phy-driver and i have one in...
View ArticleClik here to view.
R2 or R64 with SwitchPi FXS/FXO analog phone lines
@dangowrt wrote: As the 40-pin GPIO header is compatible with the Raspberry Pi, why not try to interface FXO/FXS modules from switchpi.com like that one with the BananaPi R2 or R64 boards? SwitchPi –...
View Article[BPI-R64] Tip - how to make full use of eMMC in OpenWrt
@jorticus wrote: So I found that while the BPI-R64 has a 7.2GB eMMC, only 900MB are allocated for OpenWrt in the default sdcard image (from downloads.openwrt.org/snapshots). It turns out this is...
View ArticleI need help on the Banana Pi BPI-M2 Pro!
@Stephanus_Booyzen wrote: I’m the lucky winner of the Banana Pi M2 Pro - Review and GIVEAWAY! “I’m close to give the Banana Pi M2 Pro the boot !!!” I’m a newbie if it come to this device, I need help...
View ArticleBPI-W2 add some sata ports
@asd_rojd wrote: How to add some sata ports in BPI-W2? i want to connect 4-5 sata hdd any ideas? it will work with...
View Article