Problemas com Banana Pi M2 Zero *Resolução
@Danilo1 wrote: I recently acquired a banana pi m2 zero, when I went to turn it on, not even an image appeared, I thought it was the mini hdmi to hdmi adapter, but it wasn’t, apparently it starts...
View ArticleClik here to view.
[M5] Manjaro ARM Official
@spikerguy wrote: Hello Team, I have been working on getting Manjaro ARM up for M5 and been trying since 2 days but it kept crashing without any logs. Finally I have fix all the issue but now I have...
View ArticleClik here to view.
Banana Pi BPI-D2 AI smart camera with Rockchip RV1126/RV1109
@sinovoip wrote: Banana Pi BPI-D2 based on the AI intelligent camera chip design of Rockchip RV1109 and RV1126. The high performance machine vision processor SoC is controlled by artificial...
View ArticleDefault gpio pin mode on a Bpi-m2-zero with Raspbian Jessie
@yannipt2 wrote: Hello, I’ve flashed a Bpi-m2-zero with Raspbian Jessie, installed both wiringpi and RPI.GPIO and I can control GPIO pins using python or using the console (ex. gpio write 5 0). I’m...
View ArticleNewbie with BPI-M2 Zero - Config Headless
@felipeucc wrote: I want to configure my board’s WiFi for access via SSH. Tried something like the tutorial...
View ArticleBPi-R64-V1.1 OpenWRT Image expansion
@rootgordon wrote: Hello everyone, I’ve succesfully flashed OpenWrt to my R64’s eMMC as described in the OpenWrt-Wiki. Now I’m not sure how to proceed to make all 8GB eMMC-Flash of my R64 available to...
View Article[BPI-R64] How to enable BPI PCIe slot 0?
@jpsollie wrote: I’m trying to get openwrt working on my bananapi R64. I’m currently using master github branch and compile it myself. I want to use the PCIe slot 0 for my AX card (slot 1 is populated...
View Article[R2] Logo instead of Yellow screen at bootup?
@dougiefresh wrote: Is there any way to replace the yellow screen at bootup with a logo? I saw on one of sinovoip’s u-boot repository where there was a boot logo included in the repo. I thought I saw...
View ArticleRTD1395 datasheet link unavailable
@dygydaz wrote: The link https://drive.google.com/file/d/1Jt8qUwEjLinMqURMftC3db0Xg9MIWIhu/view?usp=sharing which points to the RTD1395 datasheet (from https://wiki.banana-pi.org/Banana_Pi_BPI-M4)...
View ArticleNew on this forum. Need to identify a board
@Myron wrote: Can anyone tell me which board here is fully compatible with a Lemaker BananaPi Pro? To me it looks like it is the Banana Pi BPI-M1+. All the connectors are in the right places except...
View ArticleBPI-M2 Zero i2c bus
@Oscar1 wrote: Hi, Can anyone help me? I need to change the pins on the i2cbus 1 and 2. how can i achieve this, using Armbian 21.08 buster Regards Posts: 1 Participants: 1 Read full topic
View ArticleR64 mainline OpenWRT on sdcard
@wernervx wrote: Is there a procedure to update a sdcard image of openwrt? I have created a new openwrt 21.01 image with additional kernel drivers which I need to load onto the currently running...
View ArticleWhen will bpi-w2 support openwrt 21.02
@wang wrote: When will bpi-w2 support openwrt 21.02 Posts: 1 Participants: 1 Read full topic
View ArticleBanana Pi M2 Zero WiFi AP
@romaniuk wrote: Hi Is it possible to configure Banana Pi M2 Zero as WiFi AP? I am familiar with hostapd, dsnmsq etc. Which image I can use for first experiments? Please excuse me the basic questions...
View ArticleBPI-M4 Leds Off
@tonydee wrote: Hi, I just bought a BPI-M4 2GB, as I need to save energy, I would like to disable the 3 leds on the board, red, green, and blue. I installed Ubuntu Mate 18.04, is there a command to...
View Article[BPI-R64] 6in4 tunnel randomly stops working
@lcsaszar wrote: Dear community, I have been using 5.10.41 kernel from development snapshots for a couple of months. The only issue is that IPv6 sometimes stops working. It happens like every 1 or 2...
View ArticleSeeedStudio Grove Support
@felipeucc wrote: Hi, Is there any way to work with SeeedStudio Grove items with banana pi ? I’m especially interested in some sensors like PIR and humidity/temperature along with the Base Hat, as for...
View ArticleLinux image for BPI M2 Zero
@romaniuk wrote: Hi, I need to download image with Linux for BananaPi M2 Zero. I saw some video on BPI Wiki on this topic but when I follow instructions I cannot find BPI M2-Zero board on armbian...
View ArticleProblem with Port Triggering
@dougiefresh wrote: I have an issue. I’m trying to duplicate the port triggering functionality found in many routers for my Debian-based router image. However, I can’t find any configuration options...
View ArticleSmart TV on Banana PI M2 Berry
@felix51292 wrote: Hey folks, I just need my M2 berry for an Smart TV application. That means in best solution I had Android with netflix, sky, disney+ and amazon App to Stream movies and series from...
View Article
