BPI-R4 opkg update issue
Hi, I wanted to install a few luci-packages on my bpi-r4 with the OpenWRT Snapshot, but suddenly the opkg update ran into 404s and I’m confused. Does anybody here know what the error is? Thanks....
View Article-ash: opkg: not found after Sysupgrade
what can i do? is there anyway i can restore opkg? or i need to install a fresh copy? 2 posts - 2 participants Read full topic
View Article4G modem (wwan0) on debian11 not working
Hello I would like to ask about my debian11 with 4G modem , it not connect to internet and not getting IP address root@:~# mmcli -L /org/freedesktop/ModemManager1/Modem/0 [Quectel] Quectel EM05-G...
View ArticleHow to install android on bpi m4b
Hey guys id like to know more information about how to flash android on banana pi m4 berry im trying to use the program but can’t make it work bc i try to connect it to my pc usb and then the bpi m4b...
View ArticleWere can I connect a 2 pic fan on gpio bpi m4b
How to connect a 2 pic fan on bpi m4b?? 1 post - 1 participant Read full topic
View ArticleMT7975/MT7976 Driver and Firmware Support
Hello, I have a few questions about the “MT7986”,“MT7975N”, and “MT7975P” chips used in the Banana Pi R3 (BPI-R3) device: 1 - Open-source driver support for MT7975 and MT7976: I have reviewed the mt76...
View Article“OpenWrt One/AP-24.XY” Wifi6 Router with MediaTek MT7981B (Filogic 820) SoC...
“OpenWrt One/AP-24.XY” Wifi6 Router with MediaTek MT7981B (Filogic 820) SoC and MediaTek MT7976C “OpenWrt One/AP-24.XY” Wifi6 Router with MediaTek MT7981B (Filogic 820) SoC and MediaTek MT7976C 1 post...
View ArticleBPI R4 kernel 6.6 and Intel 7260HMW not working on miniPCIe [SOLVED]
WARNING first: switch off the 12 V to miniPCIe, see the Startup in Wiki!!! Running here: BPI R4 + WD NVME + Sierra Wireless EM9191 in M.2 slot using PCie (isolated SIM detect pin in M.2 connector)...
View ArticleCan not attch ubi5 after upgrade firmware
The Offical firmware snapshot running is OK. OpenWrt Firmware Selector But I want to use the firmware which I build from source. I separately try to download and build from OpenWrt One and Offical...
View ArticleBPI-Wifi6 mini fan control
I recently purchased the Wifi6 mini with the R3 mini case. The case includes a cooling fan. The fan runs at max speed all the time regardless of the case temperature, which is really annoying. The...
View ArticleBoot from NAND without accessing DIP switches
I successfully installed my R3 following instructions to install to NOR then NAND then eMMC. All good. I’m wondering from the U-Boot console if I could ask it to boot from NAND without changing the...
View ArticleBPI-R3 or BPI-R4 PPPoE hardware offload
Can either the R3 or R4 route line rate 2.5Gbps using PPPoE? I know there’s hardware support for NAT, but PPPoE adds additional overhead that I want to make sure the board can handle. Does anyone have...
View Article[BPI-R4] NIC Goes Down At High Load
I’m running into a problem where on ‘high’ network loads (e.g. over 500Mb/s) sustained for more than ~10s the network interfaces on my R4 go down. The logs/dmesg don’t show very much information, just...
View ArticleBanana Pi BPI-R4, Problem with EMMC
Hi everyone, I’m a beginner just starting out and I’m stuck on this and I hope you can help me. I just got a Banana Pi Bpi R4 and I’m having problems with the emmc. I copied the “. img” files to the...
View ArticleMediatek binary blobs for HW acceleration & other SOC features
What software components are required for full feature support of the Filogic 880 SOC on OpenWRT? I see that kernel source code is available (although not sure what the official GitHub link is) and...
View Article[BPI-R3] where is the calibration data?
I want to backup the calibration data before anything breaks when I play with it. Does this router have calibration data? If yes, does it store the calibration data in the nor/nand/emmc flash? Or is...
View ArticleClik here to view.
Banana Pi BPI-Wifi5 low cost Router public sale
Banana Pi BPI-Wifi5 Router use Siflower SF19A2890S2 design.It is a high performance wireless router for small and micro businesses, homes and other networking environments.It is jointly launched by...
View ArticleClik here to view.
How install openwrt on nvme?
Im already install openwrt at emmc using wiki but i cant find how i can install openwrt at nvme. Im already check so many wiki and topics but cant find answer my bpi see nvme but i cant find how i can...
View ArticleInstall openWRT on SSD
Hi, i can see in documentaion how install openWRT on nand, emmc and sd-card but nothing about ssd how can i install on ssd? 4 posts - 2 participants Read full topic
View ArticleEth0 crash for bpi r2 pro
Hello everyone, I use banana pi r2 pro for for collecting data from lan ports over tcp and send them through eth0(wan) port. normally it works well but after a time my eth0 connections fails i can not...
View Article