Gigabit ethernet stucks
@Freddy wrote: I have tried different images, including raspian jesse and Ubuntu 16.04 mate. 100 Mbit works fine, but gigabit stucks and pings start at 80% packet loss. The main reason I bought M64 it...
View ArticleA little issue with Android 5.1 V4 and power down mode
@k57 wrote: Fortsetzung der Diskussion von [BPI-M3] New image: Android 5.1 (Vsersion:V4) 2017-01-10: I will use the banana pi m3 board in a small car application. The android version 5.1 v4 doesn't...
View ArticleBanana Pi Router: NAS, router or trash? // Review
@sinovoip wrote: Banana Pi Router: NAS, router or trash? // Review Posts: 1 Participants: 1 Read full topic
View ArticleBPI-M3 Gb Ethernet
@Tomap wrote: I'm using 2016-05-16-debian-8-jessie-mate-gpu-mpv-1080p-bpi-m3-sd-emmc image. I've installed ethtool to get information about eth0 interface. It shows 100 Mb/s speed. I tried to set to...
View ArticleThand Ruivo do many cool video for Banana Pi product
@sinovoip wrote: BPi M2 Plus Android 4.4 KitKat BPi M2 Plus - Reicast & ePSXe BPi M2 Plus + BPi M3 Unboxing Banana Pi M3 - Android 5.1 Lollipop Banana Pi M3 - PPSSPP GOLD v1.2.2 Banana Pi M3 -...
View ArticleHow to install Ubuntu-mate in the EMMC?
@Dante95 wrote: How to install Ubuntu-mate in the EMMC? Posts: 1 Participants: 1 Read full topic
View ArticleApt-get update fails
@hugendubel wrote: Hello,I installed Raspbian Lite Preview, Version 3.10.101 on a Banana Pi BPI-M64. The system starts but I cannot successfully run apt-get update. The error message is: Err...
View ArticleBPI M1 Android + BPI LCDTP
@Greensy wrote: Hi all! Is there a BPI M1 image for Android with touch panel support? I've tried images from LeMaker site, but without luck. On HDMI Android works fine for me. If there is no LCDTP...
View ArticleBanana Pi BPI-M3 resolution 1920x1200
@giena32 wrote: Hi, I installed Raspbian image Raspbian Jessie 3.4 2016-07-13 MD5: a52e9205e400d559728b1cfa3f6b58ba How can I change resolution to 1920x1200?I use HDMI->HDMI cable.I know that I...
View ArticleRoot BPI-M64 Android
@dylanpdx wrote: Hello, How do I get root access on the Android image for the BPI-M64?I've made some progress by running these commands from ADB shell: mount -o rw,remount,rw /system cd /system/bin...
View ArticleRaspbian and Ubuntu images
@T0T0L_A wrote: Are developers working on the images to make the performance and wifi work better?Also are you going to so something like retropie or retrorangepi? Posts: 1 Participants: 1 Read full...
View ArticleBPI M3 Android 5.1 v4.0
@Sergey wrote: Hello. How I can remove not used desktops? And where I can find (folder) default wallpaper BPI? Posts: 1 Participants: 1 Read full topic
View ArticleFrequent freeze-ups of M2U
@Pavel_Zykin wrote: Hello, I've got mine M2U some days ago and have constant freezes repeating every 1-20 min. Device stops to respond spontaneously without any error either in log or serial console,...
View ArticleBPI-M3 and MIPI LCD
@alex_alex wrote: Hello World! I have claa101fp05 lcd.This lcd have a MIPI connector. Do you think it possible to connect the LSD and BPI-M3? Posts: 1 Participants: 1 Read full topic
View ArticleBPI M2 OFF state current
@vrichard wrote: Hello My BPI M2 board current consumption is about 80mA in off state.Everything was disconnected form the board after power down, only the battery is connected.It is too high so I...
View ArticleOpenWRT ON BPI-R1
@thegraylan wrote: Is there anyone out there that can help me get an .img of openWRT for the BPI-R1, i can get the one from here to boot, and i have tried making my own but with no luck, what have...
View ArticleBurning Android Image
@BADsadDAY wrote: I bought new Banana Pi (I have Windows) and want install Android, but I found problem. When is burning image complete, Windows ask "Please format this drive..." I try to use this...
View ArticleBluetoooth fail, not found :(
@euh wrote: Hi, i bought a m3 banana pi, and burn on emmc debian.i'll try to use bluetooth module... systemctl status bluetooth.service ● bluetooth.service - Bluetooth service Loaded: loaded...
View ArticleIs it possible to play video with gpu acceleration?
@badger wrote: Hello. I have a BPI-R1 and, after trying tons of OSs, I can't manage to simply play videos at a good speed and full screen. Is it possible on this board? if so, what's the best route...
View ArticleHDMI outout shift/corruption of first 4 lines
@Pavel_Zykin wrote: Hello! I've stumbled upon problem with HDMI output on BPI-M2U. The problem is with corruption or shift of the first 4 lines in 1080p mode in both console and X-window. This problem...
View Article