Wifi AP mode not stable
@Mariano wrote: hello I'm trying to install the realtek driver v3.0.1858 and i can't get it work. I'm installing it on Bananian 16.04. I have tested it with other drivers and the wifi in AP mode is...
View ArticleReplace BGA H3 allwinner
@joctal wrote: Hello everyone!I have a BPI M2 + where H3 allwinner was damaged, I would like to know the following: What happens if the previous H3 exchange for a new H3 is done, will it need some...
View ArticleAbout the Linux category
@sinovoip wrote: (Replace this first paragraph with a brief description of your new category. This guidance will appear in the category selection area, so try to keep it below 200 characters. Until...
View ArticleAbout the Android category
@sinovoip wrote: (Replace this first paragraph with a brief description of your new category. This guidance will appear in the category selection area, so try to keep it below 200 characters. Until...
View ArticleClik here to view.
Banana pi BPI-M2 Magic board ,design with allwinner R16 and A33 chip
@sinovoip wrote: Banana pi BPI-M2 Magic board ,design with allwinner R16 and A33 chip Banana PI BPI-M2 Magic (BPi-M2M) is an efficient quad core solution designed for internet-of-things...
View ArticleClik here to view.
Awinner R16 chip documents
@sinovoip wrote: Allwinner R16 Block Diagram R16 Block Diagram.JPG750x449 82.5 KB R16 Features R16 Features.JPG750x415 91.2 KB allwinner R16 chip Datasheet-V1.4 (1)...
View ArticleBPI-M64 Android 6.0.1 source code (question)
@Nordaezar_Vilukh wrote: Im so sorry and stupid :frowning: but i cant understand where must i pick up compiled image and how to burn it in to .img file, please HELPI must do it, because othewise my...
View ArticleH2+/H3/H5/A64 Disp2 U-Boot video driver
@sinovoip wrote: I managed to write H3 HDMI driver for mainline U-Boot. Source can be found here: https://github.com/jernejsk/u-boot You should also add CONFIG_VIDEO=y to defconfig for your board. It...
View ArticleClik here to view.
Webduino all video on youbube
@sinovoip wrote: Blockly 教學 4-1：按鈕開關 all video on youtube www.youtube.com Webduino IO Posts: 1 Participants: 1 Read full topic
View ArticleREVIEW: Single Board Computer | Banana PI BPI-M2 Ultra Development Board
@sinovoip wrote: The Banana PI BPI-M2 Ultra a Single Board Computer developed by SINOVOIP Company. This open source hardware platform is equipped with an Allwinner R40 Quad-Core Cortex-A7 CPU, 2GB...
View ArticleBPI-M2 Ultra use OpenCV and face recognition
@sinovoip wrote: 1, install OpenCV on BPI-M2 Ultra sudo apt-get update sudo apt-get install libcv-dev test opencv version: #include <opencv2/core/core.hpp> #include <stdio.h> using...
View ArticleClik here to view.
Boot problem BPI M3 V1.2 only booting with 2 powersuppy
@grikofant wrote: Hey guys, I ´ve got an BPI-M3 V1.2 and want to get him started with following Powersupply: DC-IN 5V 2,4A. After many tests with differnet images and SD-cards, I saw anybody who has...
View ArticleProblem with arch timer with linux and virtualization on BPI-M1
@jigi.kim wrote: Hi all, I have a question while I am developing a hypervisor on BPI-M1. I'm facing a problem on arch timer when running linux on my hypervisor. IRQ 26 (hypervisor timer) is got...
View ArticleGPS Serial communication
@extera wrote: I use Android system in M3.Now I coennect the GPS Modular with UART2-TX UART2-RX，Can I read the data,if I can ,could you tell me where the data ,now,i can't find the file，thanks. Posts:...
View ArticleClik here to view.
[BPI-M2U] New image: Android6.0 (Beta Version)
@BPI_Justin wrote: Android 6.0 2017-03-06 for BPI-M2-Ultra Release Note: WIFI - Supported GMAC - Supported LCD Display- Supported HDMI-Version & LCD-Version Google Drive:...
View ArticleNew core-board design based on BPI-M64 Documentation
@mJahandide wrote: I'm designing a new core-board based on BPI-M64 opensource documents summarizing it just to the processor, RAM, eMMC Flash and PMU and som connectors around. I have some questions...
View ArticleBanana Pi BPI-M1：21.5" TFT-LCD | 1920x1080 | DUAL CH. LVDS
@sinovoip wrote: Banana Pi BPI-M1：21.5" TFT-LCD | 1920x1080 | DUAL CH. LVDS 17" TFT-LCD | 1280x1024 | DUAL CH. LVDS | Banana Pi 15" TFT-LCD | 1024x768 | SINGLE CH. LVDS | Banana Pi Posts: 1...
View ArticleClik here to view.
Problem when using ttyS1 for debug
@jigi.kim wrote: Hi all, I have a short question about BPI-M1. What I'm trying to do is to change the default console of Linux kernel from UART0 (ttyS0) to another. FYI, I'm now using mainline Linux...
View ArticleBluetooth LE issues
@jmc wrote: Hi, I'm experiencing some issues with a Bluetooth LE device. The app doesn't find the device even if bluetooth is ON and the device is already paired. I'm using the latest build for the...
View ArticleShutdown -P behavior on BPI-M1
@il_mix wrote: Hi everyone! I've noticed a different behavior of the shutdown -P command using different OS images. I bought a BPI M1 to build a home NAS, using OpenMediaVault. I've downloaded 2.1 and...
View Article
