HDMI does not work
@Gennadij_Pavlov wrote: HDMI does not work. A couple of times there was an image but for a few seconds. (LED - Red, Green is blinks) OS Linux Kali, Linux Ubuntu 16 Mate from the official site. SD card...
View ArticleBuildroot support?
@rolando wrote: Is anyone working on bulidroot support? (https://buildroot.org/) it seems that should be more or less straight forward. But I’ve had problems compiling the (mainline) kernel for R2 so...
View ArticleBPI-M3 raspbian jessie update to stretch?
@andreja83 wrote: I would like to ask, does software department of Bpi plans to publish raspbian stretch update for raspbian-jessie-bpi-m3.img from 2016-07-13? kind regards Posts: 1 Participants: 1...
View ArticleCannot run ov8865 and ov5640 cameras from /dev/video0 and /dev/video1
@bpisaima wrote: I can capture an image after following the steps below for ov8865: https://bananapi.gitbooks.io/bpi-m3/en/bpim3csicamerainterface.html However, OV5640 does not work, there is only one...
View ArticleTouch Screen for Android 5.1.1 V5
@Alf_Marcelissen1 wrote: We are working on a new project to build 15.6" kiosk with capacitive touch screen monitor. Have purchased a Banana Pi M3 running Android 5.1.1 V5. The M3 works great with a...
View ArticleBanana Pi - Model: BPI-M2-Berry compared to Raspi
@Johneames wrote: Hi, one question - as a beginner i am musing about the question which system to use: i love this great community for its many users and the options to share ideas, knowledge and...
View ArticleHow should i use BPI-R1?
@Johneames wrote: Hi, I have a BPi-R1 with Igor’s 3.2 that runs as a router (with pppoe) and nginx/php5/mysql config for my wife’s blog and also with ez-ipupdate for dynamic dns I have a nasty issue…...
View ArticleThe Banana Pi Zero Review
@sinovoip wrote: The Banana Pi Zero Review 4K Update (02) Posts: 1 Participants: 1 Read full topic
View ArticleHow to use HDMI display on olimex-micro board?
@Johneames wrote: Hello, I have an olimex-mirco A2O board. I have already run A20-OLinuXino-MICRO Debian Jessie with kernel 3.4.103+ release 12 on it, and everyting is ok. I use the HDMI screen,...
View ArticleHelp me?Banana Pi Zero
@Johneames wrote: Hi all, this is my first posting although I’ve been following armbian for some time. Hopefully this is the right forum area… Does anyone know the availability (or otherwise!) and...
View ArticleBanana Pi BPI-M2 Berry
@Johneames wrote: Hi, Specifications of the Banana Pi M2 Berry The BPi Berry is similar to the BPi M2 Ultra that was released a few months back, the main differences being the size of the SRAM (1 GB...
View ArticleBtrfs as root filesystem?
@Johneames wrote: How to deal with swap (btrfs does not support swap files)? The partition size calculation is too naive for situations where experienced users use customize-image.sh to import few...
View ArticleI2C anyone? I didn't get it running
@ntech wrote: Hi, well I’m not exactly a noob but the R2 frequently makes me feel like one. Just received a couple of tiny lcd-displays and level converters and wanted to play around a bit. I...
View ArticleClik here to view.
BPI-R2 Ethernet MAC address
@BoringCat wrote: Hello BPI Team, and everyone who developing it. I try both Ubuntu image and LEDE image. And they all have same problem: The MAC address of eth0 and eth1 are random. I know that I can...
View ArticleHow to install opencv to banana pi?
@Dante95 wrote: How to install opencv to banana pi? Posts: 1 Participants: 1 Read full topic
View ArticleBanana Pi BPI-G1
@Johneames wrote: Hello, BPI-G1 is an integrated IEEE802.11 b / g / n (WIFI wireless network), IEEE802.15.4 (Zigbee), IEEE 802.11-2007 Standard (Bluetooth Low Energy4.0) development board. It is very...
View ArticleWhat is a SIM card unlock pin?
@Johneames wrote: Hi, my phone (Samsung A5) is asking for a separate pin other than the one I set myself. This began the first time I switched it on after moving to a different country, although I was...
View ArticleDiscussion: Banana Pi M2 (A31s based) ready to donate
@Johneames wrote: Anyone interested in a chinese A31s SBC called Banana Pi M2? The board works, UART is accessible but the software the vendor provides, If any of the A31/A31s developers is interested...
View ArticleNot Connecting to WiFi
@Johneames wrote: Hello, I am using the Banana Pi D1 with the official Banana Pi WiFi Module. I am able to boot the device and connect to it when it is broadcasting as an AP. From the wireless table I...
View ArticleSATA Drive problems
@donutttt wrote: I’m having a problem getting a particular drive to work with my banana pi m1. I have been running tests to try and diagnose where the problem lies, perhaps people could point me in...
View Article
