Is there a openwrt/lede that works on the bpi r2 that I can download from a...
@markcurtis wrote: I’ve seen a possible image but after going to a site that isn’t in English and downloading stuff I can’t read and pushing buttons I can’t read I’m still with out the file ?!? Please...
View ArticleFBTurbo X-server for Debian
@ntech wrote: Can someone please point me in the right direction to have X11 working? What I did: Started with Frank-W’s Debian image Compiled Framebuffer (as good as I know) into Kernel Compiled...
View ArticleClik here to view.
Lede patches, 0060 failes due to missing file
@frank-w wrote: Hi, i’m trying to make a 4.9-repo for comparing with 4.14 (to include missing festures like hnat, 2nd gmac). till patch 59 all ok. but patch 0060 needs existing...
View ArticleRecognise Headphone connected at Restart not working
@ehirt wrote: Using the android version BPI-M64_Android_LCD_V3.img from May 2017 perfectly recognises if a headphone is plugged into when booted. The mike input stays on the onboard mike but that’s...
View ArticleBattery Connction
@gnldud15 wrote: hello? First of all, Im not good at Eng.. So, Im sorry for my bad Eng… I bought BPi-r2 for my study "what is the best antenna of Multi-connection and Long Range" but, actually I don`t...
View ArticleClik here to view.
BPI-R2 OpenWRT(LEDE) Support
@garywang wrote: image.jpg1440x1080 285 KB Source code(Please note that the branch is bpi-r2-on-lede-v1) github.com garywangcn/bpi-r2_lede bpi-r2_lede - Mirror of...
View ArticleHow to back up whole image? or just undo update...?
@LeeRedford wrote: i did bpi-update -u -u $ sudo bpi-update -c bpi-m2u.conf and it wont boots up… it freezes at bananapi screen. i am going to re installing image again… this is my 4th time now… i...
View ArticleCompiling project: linking fails on Ubuntu 16.04
@Toby wrote: Hello everyone, I am trying to compile LimeSuite (https://github.com/myriadrf/LimeSuite https://wiki.myriadrf.org/Lime_Suite) for BananaPI-R2. I am using Ubuntu Mate 16.04 2017-11-27...
View ArticleBPI-R2 AP Mode Setup on New Ubuntu Image
@Yusuf_Bulbul wrote: Hi everyone. I have downloaded the last ubuntu image of BPI-R2 from this link, BPI-R2 new image : ubuntu 16.04 V1.2.1 BT and WIFI AP mode are working fine 2017-11-27. According to...
View ArticleSome times wi-fi flickering on BPI-M64
@amar_pulli wrote: Hello Bananapi Team, I have a BPI-M64 single board computer. I have been installed Ubuntu Mate operating system on BPI-M64. But some times wi-fi flickering on BPI-M64. I mean some...
View ArticleBPI-R2 How to Config for NAT
@Yusuf_Bulbul wrote: Hi, I want use BPI-R2 like modem on lastest ubuntu image. I want to make NAT, WAN to LAN. How can I make this on Ubuntu Image ? Or Can I make? Posts: 1 Participants: 1 Read full...
View ArticlePi not booting with universal power supply
@Budsen wrote: Hello everyone, hope you can give me some advice. I try to power my banana pi m2 ultra with an universal power supply with 5V and 2250mA. When everything is plugged in nothing happens....
View ArticleNTSC Camera Input?
@eyetap wrote: Hello, The spec sheet for the Pi M2 Zero says that there is “CCIR656 protocol for NTSC and PAL” under Video In. Does this mean there is an easy way to hook up an NTSC camera to the...
View ArticleMy Custom A31s Board RAM Problem
@enis wrote: Hello to everyone. I designed a custom board with AllWinner A31s. I referenced BPI-M2-V3_1 open source schemas. The PCBs were produced and I placed the materials. I had a soldering...
View ArticleBPI M3 DHT22 Sensor lol_dht22 configure problems wriingPi
@JR1 wrote: Hello, I try to compile lol_dht22 to read temp. and humidy. So I installed wiringPI as BPI-WiringPi, but I’m not able to compile the interface lol_dht22. There are some messages configure:...
View ArticleClik here to view.
How can i change resolution and rootfs?
@Shadow3561 wrote: hey, where and how can i change the resolotiuon of hdmi-output? i have changed the uenv.txt, nothing happends. i have edited the script.bin nothing happends. pls tell me how can i...
View ArticleBPI M2 Berry - infrared receiver
@Sebastian_Roitzsch wrote: I bought a BPI M2 Berry because it has a SATA interface and an infrared receiver. Unfortunately I haven’t been able to use the infrared receiver yet. The images to be used...
View ArticleCan't Install Packages
@supiri wrote: I am unable to install packages This happen one time and I reinstalled os but it happened again please help pi@BananaVault:/tmp/build/WiringBP $ sudo apt-get install python3-rpi.gpio...
View ArticleClik here to view.
Allwinner SoC-Only 3-Mic Far-Field Dev Kit for Amazon AVS instock now
@sinovoip wrote: Allwinner SoC-Only 3-Mic Far-Field Dev Kit for Amazon AVS instock IMG_3320.JPG642x509 35.9 KB IMG_3322.JPG720x568 68.8 KB IMG_3321.JPG725x597 71.2 KB We will ship the goods within...
View ArticleClik here to view.
BPI-R2 smart router board CE FCC RoHS Certification
@sinovoip wrote: BPI-R2 smart router board CE Certification BPI-R2 CE.jpg432x619 80.1 KB BPI-R2 smart router board FCC Certification BPI-R2 Fcc.jpg441x611 71 KB BPI-R2 smart router board RoHS...
View Article